TR-D4351WDIR2

Overview:

The 5 MP (2592x1920) IP camera TRASSIR TR-TR-D4351WDIR2 2.8 is designed for outdoor use year-round in locations with direct access: it features a housing protected against moisture and dust according to IP66 standards, mechanical impact resistance up to IK10, operational temperatures ranging from -40°C to +60°C, and surge protection up to TVS 4000 V.

Functionality:

Motion detection, face detection, people detection, line crossing detection, area entry and exit detection, loitering detection, vehicle detection. People counting.

IR illumination with a range of 20 meters.

WDR 120 dB — mitigates the impact of lighting variations on image quality.

3D DNR — reduces spatial noise.

Defog — clears up foggy or smoky scenes.

BLC — compensates for backlighting.

HLC — masks bright areas to improve visibility.

Day/Night mode with ICR: switches to black and white mode in low light, enhancing sensitivity by mechanically adjusting the IR filter away from the sensor.

Compression: H.265+, H.265, H.264.

Frame rate — 25 fps with WDR off, 25 fps with WDR on. Bitrate — 8 Mbps.

Cold start.

Built-in microphone.

Basics:

TR-D4351WDIR2 2.8 is built on a 1/2.7-inch CMOS sensor with a sensitivity of 0.003 lux. It is equipped with a fixed 2.8mm focal length lens, providing a horizontal angle of view of 99° and a vertical angle of view of 72°. It has an aperture of F/1.3, RJ-45 network port, audio input, audio output, alarm input, alarm output, and a microSD card slot supporting up to 256 GB. Power options include DC 12V and PoE. The maximum power consumption is 5.0 watts. The camera dimensions are Ø102.20×56.38 mm, and it weighs 320 grams.